• Home
  • About Us
  • Products
  • Press Brake
  • Shearing Machine
  • CNC Turret Punch
  • Mechanical Press
  • High Speed Press
  • Production Line
  • CNC Fiber Laser Cutting
  • CNC Punch Tooling
  • Shear Machine Blades
  • Press Brake Tooling
  • Videos
  • Customer
  • Equipments
  • Contact Us
  • Products
  • Press Brake
  • Shearing Machine
  • CNC Turret Punch
  • Mechanical Press
  • High Speed Press
  • Production Line
  • CNC Fiber Laser Cutting
  • CNC Punch Tooling
  • Shear Machine Blades
  • Press Brake Tooling
  • Local: Home > Press Brake
    PBL Hydraulic Torion Bar Press Brake-E200P

    PBL Series Hydraulic Torsion Bar Press Brake Machine

     

    1.Reference Pictures:

    ESTUN E200P NC Controller

     Color LCD display;

     Backgauge and block control,inside PLC;

     BUS mode control servo system;

     Intelligent positioning;

     Stock counter;

     Holding/decompression time setting;

     Program memory of up to 40 programs,

    up to 25 steps per program.

     One side positioning;

     Retract function

     One key backup/restore of parameters

     mm/inch

     Chinese/English

     

      Backgauge fingers

     

     Backgauge travel by ball screw & linear guide

     

     Standard Germnay Bosch Rexroth Valve                     German EMB Tubing connector↓   

         

     Standard Siemens Main Motor                       Standard Quick Punch clamp fixture

       

     

     Standard Punch & Multi V die                      Standard Front support arms

     

     

     Standard KARCON Foot Switch                  Standard USA SUNNY PUMP

     

    Optional Parts:

    Optional Back gauge fingers on double Linear guide

    Optional Manual mechanical crowning table

    Optional DELEM DA41 CNC system 

    Optional Light Curtain safe protection

    Optional Press Brake Tools

     

    2. Technical Parameters:

    3. Main Parts:

    No.

    Description

    Manufacture

    1

    Controller ( E200P)

    Estun, Nanjing

    2

    Valves

    Bosch Rexroth

    3

    Pump

    SUNNY, USA

    4

    Electrical parts

    Schneider, French

    5

    Main Motor

    Siemens

    6

    Backgauge Motor

    Detong, Shanghai

    7

    Slide Motor

    Kongte, Nanjing

    8

    Foot Switch

    KARCON, Korea

    9

    Seal ring

    NOK, Japan

    10

    Pipe Union

    EMB, Germany

     

     

     

     

    4. E200P Controllers Features

    -- 240×128 LCD Display

    -- Backguage and block control

    -- BUS mode control servo system

    -- Stock counter

    -- Program memory of up to 40 programs, up to 25 steps per program

    -- One side positioning

    -- Retract function

    -- mm/ Inch

    -- Chinese / English

     

     

    5. Machine Application:

     

    This machine is for bending sheet metal with high labor productivity and high working accuracy.

     

    By using different shapes of the upper and lower tooling, the workpiece can be bent into various shapes.

     

    This machine can produce complex shape of workpiece through multiple bending.

     

    With appropriate accessories this machine can punching holes.

     

    6. Machine Structure:

     

    6.1 The machine adopts UG(finite element)analysis,through computer-aided optimization design.

     

    6.2 The machine adopts steel plate welded structure.So it has enough rigidity.The machine will not overload due to the changing of material’s thicknesses or the wrong choice of V opening of  the lower tooling when the hydraulic transmission is working.In addition, this machine has features of smooth, easy operation, low noise, safe and reliable,etc.

     

    6.3 In the oil cylinder has a mechanical block to ensure the repeat position accuracy when the slide goes to the lower died center. And ensure the mass production bending angle consistency

     

    6.4 Using German technology to eliminate internal stress.

     

    6.5 Whole frame using a sand blasting, and sprayed with Antirust Paint.

     

    7. Slider Structure:

     

    7.1 The machine adopts hydraulic electrical control. Slide stroke is adjustable. And has an inching, semi-automatic, automatic feature. Using the inching to test the tooling and adjust easily.

    7.2 The upper moving pressbrake machine design,two oil cylinder works at the same time,easy to balance,operate and safe.

    7.3 Lower died center has a dwell time for shape forming feature, ensure the workpiece’s accuracy

    7.4 Bending angle accuracy up to ± 45' ( Suitable to Standard of JB/T22572-2011)

    7.5 The machine has low speed moving down feature,The operator can control the work piece much better.

     

    8. Hydraulic System:

     

    8.1 Hydraulic system can achieve slider’s fast down, return and upward, emergent stop during downward and other activities.

    8.2 Oil pump adopts axial piston pump. It can stand high pressure,also has low noise.

    8.3 Seals use Japan brand NOK , good sealing performance, reliable, long life.

    8.4 This machine can work continuously at rated load, hydraulic system without leak and continued stability, high accuracy.

     

    9. Electrical Control System:

     

    9.1 Electrical components and materials comply with international standards, safe and reliable, long-life, anti-jamming capability.

    9.2 Movable foot switch operation.

    8.3 Electronic control components use famous brand

    9.4 Machine use AC 380V three-phase four-wire power supply, AC 220V voltage control loop.

    9.5 Motor main circuit has a short circuit, overload, phase loss protection.

    9.6 Oil pump stop botton is also the machine’s genral stop button,when the oil pump stops,the whole machine stop working.

    9.7 The machine has inching feature control button and emergency stop button.

     

     

     

     

    10. Slider Synchronized Control:

     

    The machine adpots mechanical hydraulic synchronization mechanism, simple structure, stable and reliable.

    The machine has high synchronization accuracy, generally do not need regular maintenance.

     

    11. Backgauge:

     

    Backgauge adjustment driven by 0.55KW motor through the gear to reduce the speed than drive by the screw.Press "+". "-" can achieve the backguage moving forward and backward.(digital display size and position)When using the motor can not reach certain value.Opertor can use the manual adjustment wheel to fine-tuned to ensure that the desired adjustment value.

     

    12. Tooling:

     

    11.1 Standard upper and lower tooling one set.

    11.2 Upper tooling adopts segmented tooling.High precision interchangeability, and easy disassembly.

    There is a crowning mechanism on the connecting parts.The crowing mechanism can ensure the high precision.

    11.3 Lower tooling has multi V openings can chose by the operator.There's a die-turnover mechanism. Only need to put lifting chains on the slider's lug & die's lug. Loose the top plate, lifting the slider, then you can rotate the die to choose the required position of V Slot.

     

     

     

     

    13. Standard Accessories:

    Front support

    2 sets

    Foot switch

    1 set

    Foundation bolts

    4 pieces

    Adjust bolts

    4 pieces

    Oil gun

    1 set

    Operation Instructions

    1 book